We are very proud of our UK manufactured STOCK HLT Brewery Heaters, having rotateable, robust alloy terminal boxes with top notch Ingress Protection rated at IP67, 8mm diameter Incoloy 800 sheathed elements ideally suited to British water, and a selection of screwplug sizes in both Brass & Stainless Steel.
Select desired Power Output of Stock HLT Brewery Heaters
- One cable entry M25 (two available as an option).
- 2.25″BSP Brass screwplug size
- Terminal covers rotateable through 360 degrees. Thus cable entry position can be chosen.
- Alloy IP67 terminal enclosures. Measuring 120mm diameter x 105mm height.
- Incoloy 800, “a superior stainless steel”, 8mm diameter elements.
- Complete with SS thermowell to house our range of 11″ stats.
Hopefuly Useful Information
We understand your need to get water from one part of your process at 70ºC, up to the boil as quickly as possible. Therefore this demand for lots of power needs to be balanced with a maximum immersed length of about 1m. The more element we can squeeze into the available space, the more we are able to reduce the watt density of the elements. Therefore, it may be worth having a look at our Blog entry, in which I have tried to explain the importance of watt density and its relevance when choosing and using a brewery immersion heater.
On our blog, ElementsOfHeating there is a wealth of relevant and useful information, such as an explanation of what a heating element actually is. And my best punt at explaining the joys of watt density, and it’s crucial importance when choosing the most appropriate heating elements for water, oil, and breweries. Generally speaking, soft water, if you can find it, or indeed soften it with one of these, is good up to 80 w/in². Hard water, which is most of us, needs to be at or below 40 w/in², otherwise the magnesium & calcium sticks to the element, preventing heat dissipation, encouraging even more sh1t to stick, eventually killing the element. Light oils, such as cooking & seed oils, are ok at 25 w/in², but heavy industrial oils will need to be down at 12 w/in². Simply put, you need more element in the available space.
STOCK HLT Brewery Heaters Possible Alternatives.
If you are that rarest of breeds, The Rich Brewer, and fancy getting creative, then we can do Removeable Brewery Heaters on a hygienic SS tank fitting (DN50, 80 or 125 depending on power needs & depth of pockets), with straight or ? shaped elements to follow the circumference of the tank. We will need an in in depth conversation about your local circumstances, dimensions, entry ports, etc.
So, please call Jamie on 07897 246 779 to discuss.
STOCK HLT Brewery Heaters – Useful Stuff.
On this site, you will not only find an online catalogue of our core range of products. You’ll find tips, advice and guidance, as well as links to other resources to make your life easier, including our heating calculators.
On our blog, ElementsOfHeating there is a wealth of relevant and useful information, such as an explanation of what a heating element actually is. Also we have a full description and explanation of the component parts of a screwed immersion heater and my best punt at explaining the joys of watt density, and it’s crucial importance when choosing the most appropriate immersion heater for water, oil, and breweries. Also available is an informational entry about the process we go through when designing immersion heaters generally.
On our YouTube channel we have videos showing how to wire an immersion heater…
…an explanation of what a heating element is…
..as well as this 2 minute explanation of what an immersion heater is.
Sidetracked onto our Sister Site?
If you now realise that what you are in fact searching for is a Heating Element, as opposed to an Immersion Heater, you have two options. You can stay on this website, research Heating Elements, find what you need, & then call Jamie on 07897 246 779.
Or you can go to our sister site, HeatingElements.co.uk where you will find additional information, exampled below, and you are able to buy online, should you wish to avoid a long telephone conversation with Jamie, about Life, the Universe & Everything. Or perhaps you love banks & their 2% charges. I don’t. So please call Jamie on 07897 246 779.
The more “Wiggle Room” you have in terms of power rating & length, then the more likely we are to be able to find something on the shelf. In stock, makes the process both quicker & easier. If elements are required STRAIGHT or NARROW U BENT (ie, <=50mm fixing centres) then lengths will have to be close enuf. But if we can squeeze in a W shaped element then this allows the “middle leg” to vary according to what lengths are available on the shelf. Likewise, if you can be flexible on power rating, we may not have sufficient 1000w elements to hand, but if you could take 1250w, 1333w, or perhaps 750w, then we are better able to accommodate your needs quickly & cost efficiently.
STOCK HLT Brewery Heaters – Even more Useful Stuff.
|1 & 1/4||1.650||39.5||41.5||131|
|1 & 1/2||1.882||44.8||47.7||150|
|1 & 3/4||2.116||51.2||53.5||168|
|2 & 1/2||2.95||72.4||74.9||236.2|
We hope you find the site intuitive & easy to use, and if you have any suggestions, feedback or corrections, please contact Jamie at ImmHtr@gmail.com or on 07897 246 779. Always open to new learning & Collaboration!